EOS Spray lubrication systems
- Home page
- Product offering
- Eckardt
- Spray lubrication systems
- EOS Spray lubrication systems
EOS Spray lubrication systems
Flexible & clean application
ECKARDT EOS spray systems apply oils and release agents fully contact-free. Making use of this method you guarantee the medium is applied cleanly and evenly, which allows you to act flexibly if not all areas of a material are to be lubricated uniformly.
One huge advantage of our spray systems is their extremely fast changeover times to use different grades of oils.
Oil/release agent storage; manual and fully automatic control and monitoring of the spray process. Customers may choose a wide range of options.
- One or more adjustable spray nozzles (1) are installed in the top and bottom halves of the housing.
- The nozzles are supplied with lubricant, spray air and control air via inlets (4) located on the side of the housing.
- Lubricant sprayed past the belt edges is collected by the lower part of the housing and can be fed to an on-site container via the connection for the oil return (3).
- The escape of oil mist from the spray chamber is prevented or contained by brush strips (2) on the inlet and outlet slits.
- The EOS 1 can also be coupled with an extraction system. In this case, a centrifugal separator extracts the oil mist directly from the spray chamber.
- If necessary, a final filter stage can also be integrated, e.g. a HEPA filter system of class H13.
There are different versions available of our spray lubricators: EOS I, EOS II and EOS III. It is possible to run roller/coil lubricators with or without their own drive. In addition, we offer customized machines – for instance for hydroforming (IHU).
EOS Move is a compact spray nozzle system for manual lubrication which requires only little space and ergonomically optimizes the workplace.
Features & Benefits:
- Contact-free, low-wear lubrication
- Pin-point lubrication
- Flexible, partial application possible
- Simple application rate control
- Minimum setup times when changing spray medium
- Different spray nozzles available
- Suitable for all fluid media and numerous oil grades
EOS I
Spray lubrication systems
EOS I series spray lubricators are suitable for spraying widths up to 800 mm; thanks to their rugged steel construction suitable for press shops they are distinguished by their outstanding reliability and long service life.
Fields of application
- Automotive: metal brake lines, oil lines
- Sections for sanitation, construction and furniture industry etc.
- Components for heating systems
- Saw blades
EOS II
Spray lubrication systems
EOS II range of models has proven their worth in applications with spray widths from 500-2000 mm. An automatic scraper attached to the housing edge ensures that not a single drop of oil reaches the outer shell. The supply lines can be heated to ensure it is also possible to spray media with a higher viscosity.
Fields of application
- Automotive: seat rails, car body components, roof/ window frames
- Kitchen fittings
- Sinks
- Radio housings
EOS III
Spray lubrication systems
The largest spray lubricators are designed for spray widths between 2500-5000 mm. Equipment features include oil drip protection and heatable supply lines for high viscosities as well as integrated support rollers/feed units that guarantee the sheets of metal are reliably transported through the spray chamber.
Fields of application
- Automotive: wings, structural components
- Household appliances
EOS Move
Spray lubrication systems
In comparison with conventional systems EOS Move swaps roles, since it is the spray bar that moves – not the blank. This enables the entire process – blank insertion, blank lubrication and blank removal – to be conducted requiring significantly less working space, and the machine operator to work much more ergonomically.
Fields of application
- For blank sizes of up to 600 x 600 mm
- Ideal for use in spatially limited areas
